Duo8 SR1 rated fencing is a double wire welded mesh fencing system. This system is ideal for applications where Secured By Design accreditation may be required.
The SR rated fencing system offers the same product benefits as the standard Duo8, but with added security and tamper resistant clamp bars and fixings.
The Duo8 SR1 rated fencing system has been Secured By Design approved by the Association of Chief Police Officers and Security Rating certification to LPS1175 and entry into the Red Book from the Buildings Research Establishment (BRE) achieving the security rating SR1.
The Duo8 SR1 rated fencing systems are manufactured with dual 8mm horizontal wires sandwiching single 6mm vertical wires. This produces a 50mm x 200mm mesh pattern that is not only strong but vandal resistant.
The Duo8 SR1 Rated Fencing system panels are available in 2m and 2.4m in height and up to 3m wide.
Coupled with Zaun’s tamper resistant stainless steel fasteners, the result is a rigid perimeter fence that offers a high degree of vandal resistance. With an extremely high level of through visibility this SR1 rated fencing system is ideal for additional CCTV cameras.
The posts may be supplied using either 60mm x 40mm or 80mm x 40mm Rectangular Hollow Section (RHS). Lenghts of 2750mm or 3100mm may be supplied for fixing in the ground (bolt down posts are also available). Each post has spacing at a maximum of 3025mm centres.
The panels may be fixed to the posts with a full height 40mm x 5mm clamp bars and stainless steel fixings. The full height clamp bars create a flush safe finish with the mesh ends behind the clamp bar. An enhanced over clip is applied on the upper most and lower most fixings.
Suitable security toppings are also available to further enhance the perimeter security of your site.
Pedestrian gates are single leaf 1.2m wide, (or width to suit). Framed in a 50mm x 50mm RHS with Zaun Duo8 mesh welded inside the frame, with slide latch. Each gate features a rubber bump stop and 2 x suitable gate posts.
Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit). Framed in 50mm x 50mm RHS, with Zaun Duo8 mesh welded inside the frame, with drop bolts and slide latch. Each vehicle Gate features a rubber bump stop and 2 x suitable gate posts.
Each system may be galvanised only or galvanised and polyester powder coated in your choice of RAL colours. For a full list of colours Click Here.
Samples of Zaun Duo8 SR1 are available upon request, to request your free sample please click here.
|Height||Post Centres||Vertical Wire||Horizontal Wire||Mesh Pattern||Post Section|
|2.00 mtr||3.025 mtr (Max)||6mm||8mm||50mm x 200mm||60mm x 40mm|
|2.40 mtr||3.025 mtr (Max)||6mm||8mm||50mm x 200mm||80mm x 40mm|
Enter your details below to proceed.Send