The Terror Stopper PAS 68 Automatic Crash Bollards from Zaun are a retractable rising bollard system. Successfully crash and impact tested to stop a 7.5t vehicle travelling at speeds of up to 50mph.
This counter terrorist bollard, hydraulically driven for reliability and strength. Successfully impact tested as single and dual unit systems. Both impacts resulted in the automatic rising bollards stopping the vehicle within the aperture and remaining fully functional.
Both static and rising bollards are installed at 1.2 metres between the upright bollard faces to meet the PAS 69 guidelines.
Manufactured with a stainless steel clad as standard, with optional painted powder coating. Fabricated from S355 structural steel plate which is a high-strength low-alloy European standard structural steel.
The retractable automatic crash bollards have an industrial hydraulic pump drive unit. Designed for ease of installation and maintenance.
The system also interfaces with any access control systems. A traffic light system also included as standard on all automatic bollard systems.
These automatic bollards are crash rated and tested to achieve BSI PAS 68:2010 V/7500[N2]/80/90:5.0/9.2.
Designed with a bollard lift height of 900mm and an overall diameter of 356mm. A nominal operating speed of 6-10 seconds (fast operation also available) and 100% duty rated.
Finished in a stainless steel clad and also available with a wide range of options. Including; accumulator, fast operation, manual hand pump, high security cabinet and anti-tamper alarms.
Additional safety options also include; vehicle detector loops, safety photocells, LED traffic light heads, flashing beacon and audible alarms.
Controls also include a programmable logic controller (PLC) with built in safety features. This will accept inputs from access control systems including access card, voice, etc. A push button also supplied as standard.
BSi PAS 68 is the Publicly Available Specification for vehicle security fencing, gates, blockers, bollards and barriers. It has become the standard and benchmark for all Hostile Vehicle Mitigation (HVM) products. It is this specification that all physical perimeter security equipment is tested to prevent vehicle borne attacks. (more…)
|Operation:||Automatic Accumulator or Hand Pump|
|Operating Speeds:||Typical speeds of 6-10 seconds (Fast operation also available)|
|PAS 68 Result:||V/7500[N2]/80/90:5.0/9.2|
|Bollard Type:||Rising Bollard|
|Civil Requirements:||L: 2080mm x W: 1000mm x D: 1500mm Control Cabinet foundations: L: 800mm x W: 80mm x D: 300mm|
|Electrical Requirements:||Three phase supply|
|Optional Extras:||Accumulator, Fast Operation, Manual Hand Pump, High Security Cabinet, Anti-Tamper Alarms|
|Safety:||Vehicle Detector Loops, Safety Photocells, LED Traffic Light Heads, Flashing beacon, Audible Alarm|
Enter your details below to proceed.Send