


The Terror Stopper PAS 68 Ultimate HVM Barrier is an automatic drop arm barrier. Successfully impact tested against a range of different threats and successfully impact tested to PAS 68, stopping a 7.5 tonne vehicle travelling at 50mph (80kph). On impact the PAS 68 Ultimate Barrier stopped the vehicle within the aperture.
The Terror Stopper PAS 68 Ultimate Barrier beam, also tested with a under run skirt to test arresting capabilities on other vehicles such as saloon cars. This automatic PAS 68 Ultimate Barrier proved that it will stop low and high energy vehicles from entering the site.
Industrial hydraulically operated automatic barrier. Designed for easy installation and also maintenance.
The automatic PAS 68 Ultimate Barrier, also able to interface with any access control system and has a maximum width of 4500mm and has a crash beam height of 1050mm.
This HVM barrier has been successfully tested and achieved BSI PAS 68 rating of V/7500[N3]/80/90:5.3/2.0.
Designed with a boom height of 1055mm and a variable width of up to 4500mm.
Manufactured using special impact posts with all rebar already formed. A fully welded rising beam using a steel frame. The Impact Beam also fitted to stanchions at 1055mm height.
This HVM barrier is finished by Shotblast, hot zinc sprayed (galvanised), primed and finished with a final coat of polyurethane paint. This process also provides a 20-year corrosion protection system for exterior, industrial polluted inland sites to BS5493, 1977 (Revised 1984). Alternative finishes also available on request.
Also available with a range of automatic barrier options including; accumulator, Extra Fast Operation, Manual Hand pump, High Security Cabinet, Anti-tamper alarms etc.
A range of safety options are also available including; Safety-edges, Vehicle Detector Loops, Safety Photocells, LED Traffic light heads, Flashing beacon, Audible alarm
Each Ultimate HVM Barrier also has typical operating speeds of 12-18 seconds to rise. Depending on length and configuration.
BSi PAS 68 is the Publicly Available Specification for vehicle security fencing, gates, blockers, bollards and barriers. It has become the standard and benchmark for all Hostile Vehicle Mitigation (HVM) products. It is this specification that all physical perimeter security equipment is tested to prevent vehicle borne attacks. (more…)
Description | |
Operating Speeds: | Typical speeds of 12-18 seconds (depending on configuration). Extra fast operation also available |
PAS 68 Result: | V/7500[N3]/80/90:5.3/2.0 |
Boom Height: | 1055mm |
Boom Length: | Variable of up to 4500mm |
Barrier Type: | Rising Arm Barrier |
Electrical Requirements: | 10 Amp, 5 Wire, 400V, 50Hz, Three Phase and Neutral Supply |
Civil Requirements: | Cabinet: L: 980mm x W: 1400mm x D: 1055mm Barrier Base: L: 2800mm x W: 2040mm x D: 400mm End Rest Base: L: 2800mm x W: 1540mm x D: 400mm |
Optional Extras: | Accumulator or manual hand pump / high security cabinet / interfaced to any access control system / traffic light system |
Safety: | Safety-edges / Vehicle Detector Loops / Safety Photocells / LED Traffic light heads / Flashing beacon / Audible alarm |
Enter your details below to proceed.
Send