The Zaun Terror Stopper crash rated Bi-Folding Gates consist of a post upon which a bi-folding leaf is hinged on to. Successfully impact tested to PAS 68 stopping a 7.5 tonne vehicle with zero penetration and remained fully functional after impact.
These PAS 68 Bi-Folding Gates, available in either tracked or trackless options. In the trackless option the PAS 68 bi-folding gate does not require any in ground or overhead tracks to fold the gate in half. This gate instead uses an in-house folding system housed inside the casing on top of the post hung leaf. In the tracked option, tracks are installed either over head or in ground to fold the gate in half.
The post hung section is driven by a torque motor driving a crank arm through the 270 degrees giving the gate a good mechanical advantage. The 270 degree drive mechanism together with an electro-magnetic brake, locks the gate in both open and closed positions.
The PAS 68 Bi-Folding Gates, easily interfaced with any access control system and manufactured to a maximum width of 4.2 metres. In addition, each gate can be supplied with aesthetics to suit the surrounding environment.
This Bi-Folding speed gate crash tested and rated BSI PAS 68 rating of PAS 68:2010 V/7500[N2]/64/90:2.2/0.0 and also V/7500[N3]/80/90:6.8/9.1.
Manufactured and designed with a maximum width of 4200mm (between hinge and receptor post). With a minimum height of 2200mm. These bi-folding speed gates, also 100% duty cycle rated, designed specifically for continuous operational use.
Installed with a hydraulic motor drive and a hydraulic pack mounted onto the hinge post. Each gate features a hand pump for manual operation situated in a IP65 rated enclosure.
The gate control system, designed also using a PLC based control system. A hydraulically operated locking pin secures gate leaf into place.
Designed to meet BS-EN13241-1 standard for installation, testing and ongoing compliance of automatic gate and
door systems. All gate systems also come complete with a through photo beam system between posts. Additional photobeams can also be added for extra protection.
The leading edges of the leaves, also fitted with electrical rubber safe edges which if in contact with an obstruction
will stop the operation of the gate. Zaun recommend that all installations include vehicle detection loop systems.
Galvanised and/or galvanised and also polyester powder coated to a specific RAL No. For a full list of colours Click Here.
BSi PAS 68 is the Publicly Available Specification for vehicle security fencing, gates, blockers, bollards and barriers. It has become the standard and benchmark for all Hostile Vehicle Mitigation (HVM) products. It is this specification that all physical perimeter security equipment is tested to prevent vehicle borne attacks. (more…)
|Operating Speeds:||Dependent of automation type|
|PAS 68 Result:||V/7500[N2]/64/90:2.2/0.0V/7500[N3]/80/90:6.8/9.1|
|Gate Height:||Minimum of 2200mm|
|Gate Width:||Up to a maximum of 4200mm|
|Gate Type:||Bi Folding Speed Gate|
|Civil Requirements:||Minimum Foundation depth of 280mm|
|Electrical Requirements:||230V 50Hz single phase rated at 10 Amp|
|Optional Extras:||Signage / Audible Alarm / Can be interfaced to any access control systems|
|Safety:||Safety-edges / Vehicle Detector Loops / Safety Photocells / LED Traffic light heads / Flashing beacon / Ultra-Sonic Sensors|
Enter your details below to proceed.Send