The Terror Stopper PAS 68 Full Depth Road Blocker, successfully crash tested to PAS 68 specifications. Designed specifically to withstand a hostile vehicle borne improvised explosive device and stop the vehicle dead in its tracks. The PAS 68 full depth road blocker, successfully tested with a 7.5 tonne vehicle at 50 mph.
Ideal for applications where there is plenty of depth to excavate and the sub-surface, free from the path of any buried utilities.
This PAS 68 Road Blocker is manufactured and designed to BS 6571: Part 4 1989 with tread plates of 10mm thick (over plain) durbar tread plate. Featuring a 0ne piece 3mm thick sheet skirt. The trimmer frames are 70mm x 70mm or 80mm x 80mm angle sections. Fully spragged around the periphery for maximum holding.
Riser frames and base frames manufactured from heavy gauge RHS sections and fully welded. Designed to withstand axle weights of 15 tonnes.
The road blockers are powered by a hydraulic power pack, configured to suit particular requirements. With a typical operating speed of 5 seconds, faster operations may also be achieved with larger hydraulic packs or accumulators.
To manually release the blocker, hand pumps also supplied as standard within the power pack.
Enclosures, controls and hydraulic power packs can also be designed to operate multiple blocker systems. Accumulators, incorporated to provide fast emergency operation and/or limited operation during a power failure.
A Uninterruptible Power Supplies (UPS) can also be incorporated into the system as a better means of covering electrical power failures. Available for normal operating speeds only but will produce far more operations than is practical with an accumulator.
The full depth blocker, controlled by Programmable Logic Controller (PLC) and therefore very flexible for customers’ requirements. Optional features can also include conventional push button station or Human-Machine Interface (HMI) terminals. Single or multiple control positions and all forms of access control can be utilised.
BSi PAS 68 is the Publicly Available Specification for vehicle security fencing, gates, blockers, bollards and barriers. It has become the standard and benchmark for all Hostile Vehicle Mitigation (HVM) products. It is this specification that all physical perimeter security equipment is tested to prevent vehicle borne attacks. (more…)
|Operation:||Automatic Accumulator or Hand Pump|
|Operating Speeds:||Typical speeds of 5 seconds|
|PAS 68 Result:||V/7500[N2]/80/90:0.0/25.0|
|Blocker Type:||Road Blocker|
|Civil Requirements:||Minimum depth of 1000mm Typcial Foundation L: 4200mm x W: 3300mm x D: 1000mm|
|Electrical Requirements:||400 volt 50hz three phase ( TP&N ) 10amps is the preferred supply, but single phase can be accommodated.|
|Optional Extras:||Accumulator / Extra Fast Operation / Manual Hand Pump / High Security Cabinet / Anti-tamper alarms / Push Button Station / Human Interface Functions|
|Safety:||Folding Skirt / Vehicle Detector Loops / Safety Photocells / LED Traffic light heads / Flashing Beacon / Audible Alarm|
Enter your details below to proceed.Send