FenceProtect Electric Security Fencing, an advanced electrified perimeter security system that fully monitors the protected boundary of the high voltage pulses on or off.
Ideally installed on sites of Critical National Infrastructure (CNI Sites). Also fully monitored high and low voltage perimeter security systems.
Our ‘true’ low voltage system design, when ‘disarmed’ and the HV pulses turned off, continues to be fully monitored even though no shocks are present when touched. If the wire is cut, shorted or tampered with then the system will still generate an alarm state. In the same way as when the HV pulses are present.
Designed to provide perimeter security that deters, detects, denies and defends against potential intruders with a short, sharp, painful but regulated safe electric shock.
Zone Alarm output is provided for interfacing with CCTV and other local/remote monitoring systems.
Zaun’s electric security fence system is a physical and psychological barrier for intruders. Pulsed electrified perimeter security systems provide total security and protection of any perimeter or boundary.
The construction of the system creates a psychological and physical barrier to prevent would be intruders form achieving their objectives.
All components used for the construction of our electric fencing systems fully comply with national and international standards including BSEN 60335 and BS1722 part 17. FenceProtect systems, designed and installed safe and secure.
This pulsed electrified perimeter security system provide total security and protection of any perimeter or boundary. The construction of the FenceDetect system creates a psychological and physical barrier to prevent would-be intruders from achieving their objective.
Would-be intruders who come into contact with the electric fence system, repelled by a regulated electric shock. Attempts to cut, load, short-circuit and also tamper with the system, detected and alarms set off.
A real time event memory and alarm history log automatically records all events. Including the time and date of a armed, disarmed, and alarmed system. In the event of mains failure standby rechargeable batteries maintain the system armed for a minimum of 10 hours. (This period can easily extended for specific system or specification requirements).
Alarm relays are provided for each zone of protection for switching cameras, CCTV systems, security lighting or other local or remote alarm monitoring systems. Programmable electronic outputs also available for customised alarm requirements and mimic displays.
Also ideal for use with CCTV remote monitoring and surveillance systems. An open system architecture allows our security systems to easily interfaced with other security systems, for full remote monitoring and control, including remote arming, disarming, system status, remote test and also alarm reporting by zone.
|Standards:||All National & International standards including; IEC 60335, BS-EN60335 & BS1722 part 17|
|Zones:||Two double pole zones each high and low voltage monitoring. High voltage zones with independent 2.5 joule energisers|
|Pulses:||HV pulses up to 10kv (8.5kv typical) every 1.2s|
|Monitoring:||Independent low voltage monitoring of each zone|
|Programming Options:||Selectable pulse count (for HV and LV together) 1-15 pulses / selectable alarm threshold 2/3/4/5kv / Less than 10w power consumption per dual zone controller|
Enter your details below to proceed.Send