Barcode Railings

The unique Barcode railing system, designed and manufactured by Zaun. Developed from the standard vertical bar railing range into an architectural railing system. This Barcode Railing system provides architects and specifiers with a unique perimeter fencing solution. With the ability to custom design to spell out a word, when using a barcode scanner. Simply hold up your phone or tablet to scan the fence to reveal coded message.

The Barcode Railing vertical bar systems are a stylish and robust solution to both perimeter security and property demarcation, manufactured with various vertical bar tubes, depending on the desired word and available in your choice of colours.

Available up to 2.0m for perimeter security. Both swing and sliding gates, available to match the railings and manufactured to the width you require.

Manufactured using vertical bars, manufactured in various thicknesses between 12mm and 20mm depending on the desired wording. Horizontal bars feature at the top and bottom of the panels.

Posts designed using square hollow section (SHS), to various sizes depending on height (see specification for details_. Spaced at 2760mm centres. All posts are available as in-ground, bolt down or cranked over a wall installation options.

The Barcode railings panels, fixed to the posts using slotted cleats, cup square bolts and shear off nuts. Mid panel feet are supplied to support the panel and prevent sagging.

Each panel can be customised to spell our a word that can be used with a barcode scanner.

Barcode Railing Architectural Gates

Pedestrian gates are single leaf 1.2m wide, (or width to suit). Framed in a 50mm x 50mm SHS with Zaun Barcode Railing vertical bar infill, with slide latch. Each gate features a rubber bump stop and 2 x suitable gate posts.

Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit). Framed in 50mm x 50mm SHS, with Barcode Railing vertical bar infill, with drop bolts and slide latch. Each vehicle Gate features a rubber bump stop and 2 x suitable gate posts.

Share this