CorruSec Premier 10 minute delay fencing, a patent pending innovative high security perimeter fencing solution, designed and developed by Zaun.
A unique construction, specifically designed to provide a minimum delay time of at least 10 minutes when independently tested in line with BRE’s SR4 testing protocol. The specially configured mesh system has been independently tested to defeat a range of attack methods including both hand tools and power tools. Ideal for protecting assets on sites including water utility sites, oil and gas compounds, data centres and other sites of critical, national importance. The robust fencing solution also provides good visibility for use with CCTV camera systems.
CorruSec Premier is configured using anti climb HiSec Super 10, flat front and rear panels and a corrugated HiSec 3/5/10 mesh panel in the centre. Each flat panel features a 76.2mm x 12.7mm mesh configuration with 4mm horizontal and 10mm vertical wires. A buried version of CorruSec Premier is available replacing the back flat panel with HiSec 3/5/10, making the system more cost effective. The corrugated section pressed to approximately 100mm in depth. All three layers are bolted together using bolts fixed into place in a grid pattern throughout the combined fence panel.
At a minimum height of 2.8 metres high, CorruSec Premier features a maximum corrugated infill of 2.4 metres high. Supplied with widths of 2.5 metres with 2540mm post centres with a double row of fixings. Posts designed using 80x80mm SHS and available in either bolt down or in ground post options. Full panel assembly fixed to the posts using 80mm full height clamp bars with fixing centres of 9 inches (228.6mm).
Available powder coated in almost any RAL colour. A wide range of fence toppings also available
|Height||Post Centres||Vertical Wire||Horizontal Wire||Mesh Pattern||Post Section|
|2.80 mtr+||2.540 mtr||10mm||4mm||12.7mm x 76.2mm||80mm x 80mm|
Enter your details below to proceed.Send