The Zariba ring top fencing system uses an ornate ring top design and optional finials to provide one of the most attractive mesh fencing systems on the market.
This ring top fencing system uses an attractive ring top and the mesh pattern that has been specifically designed to generate an aesthetically pleasing appearance for any perimeter.
Manufactured with twin horizontal 8mm wires ensures that the ring top fencing system is robust and can be used in areas where the system is likely to incur regular impact. In addition, the use of bright colours sets the fence off, making it an attractive feature in any space.
Zariba combines the robust Duo8 platform and a ring top design to provide an extremely durable segregation fence with a contemporary feel.
All Zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
For a full list of colours, click here
The Zariba ring top fencing system features a post, and clip configuration, providing a simple and easy installation method. Supplied with vandal-proof security fixings and installed using either power or hand tools.
Panels may be stepped in increments of 30mm as required within the clamp bar system. However, it is recommended that the taller panels are either partially buried or additional posts are used on steeper gradients.
Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available:
It is recommended that a safety channel or capping strip is applied to protect people from the sharp edges of the mesh for low-level fences.
Pedestrian gates are single leaf 1.2m wide (or width to suit), framed in a 50mm x 50mm RHS with Zaun Duo8 mesh welded inside the frame, with slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit), framed in 50mm x 50mm RHS, with Zaun Duo8 mesh welded inside the frame, with drop bolts and slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
|Height||1230mm, 2430mm Note: Other heights are available upon request|
|Mesh Size||200mm x 50mm|
|Wire Diameter||6mm Verticals / 2 x 8mm Horizontals|
|Top Edge Projection||Minimal Projections|
|Post Size||80 x 40 / 60 x 60|
|Clamp Bar Size||40 x 5mm|
|Fixings||Anti Tamper Security Fixings|
Enter your details below to proceed.Send