A range of pedestrian turnstiles, available in full height, 3/4 height or half height options. Our high specification pedestrian turnstiles are suitable for controlling access in a wide variety of environments. Designed for perimeter use and often used in conjunction with sliding or hinged gates. Providing both pedestrian and vehicle control. On receipt of a signal from a push-button, card reader etc, the turnstile will release the rotor, then closes and re-bolts.
Available in single or double cage versions, depending on the site requirements. Turnstile heights can also vary for full height turnstiles, tailored for site requirements. A single rotor for left or right handed installations or twin rotors where two turnstiles are required.
Designed with 4 wing 90 degree or 3 wing 120 degree rotor options for a faster throughput. Also available with additional signage, LED down lights, canopy, directional indicators, access control plates and cowled exit switches.
Manufactured with a cage combination of vertical bars with columns to form a short walkway. Columns also used to mount card readers and other access control solutions. A metal canopy, designed with anti-drip guttering, lifts off for access.
Also available in any colour in the RAL colour range for a full list of colours click here.
Full height pedestrian turnstiles are ideal for providing a secure means of controlling pedestrian movement in and out of restricted areas, usually in an outdoor environment. The pedestrian turnstile caters for bi-directional access control, and can accommodate the movement of 15 to 20 people per minute.
|Duty Rating||100% - designed for continuous and frequent use|
|Options||Signs / Special Colour / LED Down Lights / Cowled Switch / Trombone Rotor / Canopy / Directional Indicators / Bespoke Access Control Plates / 3/4 Height Turnstiles|
|Access Control||Keypad / Proximity Cards / Voice/Video Intercom Access / Token Acceptor|
|Dimensions||Single Rotor Turnstile Foundation: 90° - (L): 1480mm x (W): 1410mm x (H): 2350mm Twin Rotor Turnstile Foundation: 120° - (L): 2220mm x (W): 1500mm x (H): 2350mm|
|Electrical Supply||220v 50Hz 5 amp supply single phase|
Enter your details below to proceed.Send