ArmaWeave® Plus CPNI Rated Fencing system has been designed for installation on sites of critical national importance (CNI). Developed specifically for sites that need the highest possible level of perimeter protection.
The CPNI approved enhanced fencing system offers a more substantial delay from attack from hand and power tools than other traditional welded mesh fencing systems. Thanks to its tighter mesh pattern and use of high tensile steel wires.
The mesh properties are maintained because of the careful design to eradicate risk from attack. ArmaWeave® Plus CPNI rated fencing system is also our highest rated high-security fencing system, giving a maximum delay from forcible attack.
Tested and approved for UK government use by CPNI (contact CPNI for details) and various government departments. ArmaWeave® Plus meets the current criteria for a forcible attack. Also tested and approved by the MoD to use with most of the markets leading PID Systems.
The tight woven mesh pattern also offers no climbing aids and provides little room for blades and cutting tools to attack the fabric.
The unique properties of the ArmaWeave® Plus CPNI rated fencing system has the ability to be raked. Thus, limiting the need for stepping panels on slopes and reducing installation costs significantly compared with standard welded mesh systems while still conforming to the highest-rated standards for fencing products defending against forcible attacks.
The ArmaWeave® Plus perimeter security fencing system features a post and clamp bar configuration, providing a simple and easy installation method. Supplied with vandal-proof security fixings and installed using either power or hand tools.
Note: For CPNI, the maximum change of direction is 45°. A flange is welded at the post at 45°, or a post with two welded flanges at 22.5°.
Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available:
Pedestrian gates are single leaf 1.2m wide (or width to suit). Framed in a 100mm x 50mm RHS with Zaun ArmaWeave® Plus woven mesh bolted to the frame, with slide latch. Each gate features a rubber bump stop and 2 x suitable gate posts.
Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit). Framed in 100mm x 50mm RHS, with ArmaWeave® Plus Mesh bolted to the frame, drop bolts and slide latch. Each vehicle Gate features a rubber bump stop and 2 x suitable gate posts.
Enter your details below to proceed.Send