Ideal for any situation where bicycles are likely to be left. Each bike locker is supplied with its own lockable gate to keep your bicycle safe and secure from any would-be thieves.
Zaun‘s robust locker units are designed and manufactured to mitigate the threat of bike theft by using a simple yet strong locking system to ensure the bike’s security. Manufactured with Duo 6 200 x 50mm mesh with 6mm horizontal wires sandwiching a single 5mm vertical wire, ensuring a difficult to cut mesh is used as the locker body.
Individual bike lockers mean that the bicycle cannot be tampered with and eliminate the need to remove the saddle or the rear wheel. In addition, in school environments, individual lockers encourage pupils to be responsible for their own bicycles.
The bike lockers use tamper-resistant security fixings to ensure individual bikes are kept safe.
All Zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc layer and the paint. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by the maintenance of the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
For a full list of standard colours, click here
The Duo 6 double wire mesh fencing system features a frame and clamp bar configuration, providing a simple and easy installation method. Supplied with vandal-proof security fixings and installed using either power or hand tools.
Pedestrian gates are single leaf 830mm wide, framed in a 50mm x 50mm RHS with Zaun Duo 6 mesh welded inside the frame, with slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
|Mesh Size:||200mm x 50mm|
|Wire Diameter:||5mm Vertical / 2 x 6mm Horizontals|
|Frame Size:||50 x 50mm|
|Clamp Bar Size:||40 x 5mm|
|Fixings:||Anti Tamper Security Fixings|
Enter your details below to proceed.Send