Zaun’s recessed goal can be designed to suit your requirements and allow a mobile goal unit insertion. Perfect for storing goals while they are not in use or to house the goal for the gameplay. Suitable for a wide range of goal solutions from football goals of all sizes, 5 a-side goals, 7 a-side goals, hockey goals and other sport or MUGA equipment.
The recessed goal is available with a selection of mesh options, including our Duo Sports fencing system, manufactured from either dual horizontal 6mm wires sandwiching single 5mm vertical wires (Duo 6 Sports) or 8mm wires sandwiching single 6mm vertical wires (Duo 8 Sports). This produces a 50mm x 200mm mesh pattern that is strong and vandal resistant and offers the best value.
Alternatively, recess goals can also be manufactured using our Super Rebound fencing system, which has been developed to offer a more attractive, practical and community-friendly alternative to standard wooden or plywood rebound boards. The Super Rebound 8 fencing system uses twin horizontal 8mm wires, and the Rebound 6 system uses twin horizontal 6mm wires. The lower 1.2 metres of the fence has a 50mm x 66.6mm mesh pattern. This robust rebound mesh acts as a wooden rebound board in terms of quality but has many advantages over wooden boards.
Other mesh options, including tennis and hockey, are also available upon request.
Typically one of the major stumbling blocks during the planning of sports courts is the noise during play. Our sports fencing systems have been developed to overcome the rattle that so many residents object to. Every 200mm to the lower 1.2m high impact area ensures minimum movement between the panel and post with fixings. Furthermore, each fixing uses a synthetic EPDM insert to insulate the panel from the post and reduce noise by circa 29%.
The recessed goal is available with or without a basketball unit, placed on the fence line or mounted on a steel arm. Designed to be a continuation of the perimeter fence of the sports area or may also be used to form part of a goal wall. Available in various heights, up to 4.5m with a recess which can be defined, depending on what is required to be stored.
All Zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
For a full list of standard colours, click here
The Super Rebound double wire mesh fencing system features a post, EPDM rubber inserts and clamp bar configuration, providing a simple and easy installation method. Supplied with vandal-proof security fixings and installed using either power or hand tools.
Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available:
It is recommended that a safety channel or capping strip is applied to protect people from the sharp edges of the mesh for low-level fences.
|Height:||Up to 4.5m Note: Fence heights above 3m are made using 2 or more panels|
|Recess Depth:||Optional but typically between 0.8m to 1.2m|
|Mesh Size:||Duo Sports - 200mm x 50mm Super Rebound - 66.6 x 50mm at lower 1.2m with 200mm x 50mm above (full height rebound also available on request)|
|Wire Diameter:||Duo Sports 6 / Super Rebound 6 - 5mm Verticals & 2 x 6mm Horizontals Duo Sports 8 / Super Rebound 8 - 6mm Verticals & 2 x 8mm Horizontals|
|Top Edge Projection:||Minimal|
|Post Sizes:||60 x 60 / 80 x 40 / 100 x 50 / 120 x 60 dependant on height|
|Clamp Bar Size:||40 x 5mm|
|Fixing Centres:||200mm to lower 1.2m & 400mm above|
|Fixings:||Anti Tamper Security Fixings|
Enter your details below to proceed.Send