The Sportif sports pitch fencing is a unique mesh configuration commonly found in sports MUGA and outdoor sports applications in France & throughout Europe.
The Sportif is designed with a unique 150mm x 150mm mesh pattern at the top and a 50mm x 150mm open mesh configuration typically at the bottom 1.2-metre high impact zone. The open mesh pattern at the top of the panel provides more visibility to spectators while still increasing ball retention.
Each Sportif sports pitch fencing panel is manufactured with 8mm dual horizontal wires and sandwiches single vertical wires providing a rigid and strong fencing panel. With fixings, every 200mm to the lower, high impact areas of the fencing and rubber inserts at each fixing, rattle is virtually eliminated during play. In addition, clamp bars covering panel ends to ensure a safe playing surface with no sharp edges.
Each post can be supplied for dig in-ground, bolted down or cranked over the wall, depending upon your requirement.
All Zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
For a full list of standard colours, click here
The Sportif double wire mesh fencing system features a post, EPDM rubber inserts and clamp bar configuration, providing a simple and easy installation method. Supplied with vandal-proof security fixings and installed using either power or hand tools.
Panels may be stepped in increments of 30mm as required within the clamp bar system. It is recommended that the taller panels are either partially buried or additional posts are used for steeper gradients.
Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available:
Pedestrian gates are single leaf 1.2m wide (or width to suit), framed in a 50mm x 50mm RHS with Zaun Duo8 mesh welded inside the frame, with slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit), framed in 50mm x 50mm RHS, with Zaun Duo8 mesh welded inside the frame, with drop bolts and slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
|Height:||2280mm Note: Other heights are also available upon request.|
|Mesh Size:||50 x 150mm at lower 1.2m with 150 x 150mm above|
|Wire Diameter:||6mm Verticals & 2 x 8mm Horizontals|
|Top Edge Projection:||22mm as standard / optional flush|
|Post Sizes:||80 x 40|
|Clamp Bar Size:||40 x 5mm|
|Fixing Centres:||200mm to lower 1.2m & 400mm above|
|Fixings:||Anti Tamper Security Fixings|
Enter your details below to proceed.Send