Zaun‘s Axiom perimeter fence system is a lightweight, cost-effective profile mesh fencing system ideal for low-security perimeter demarcation. Designed with a contemporary, non-threatening design, perfect for parks, schools, industrial estates, commercial sites or simple area demarcation.
This high quality and long service life profile mesh system is visually appealing with large 200mm x 50mm open mesh patterns, enabling this perimeter fence system to blend into its surroundings.
The profile mesh panel is constructed from 5mm wires and has V pressings along the length of the panel to provide lateral rigidity. The panel is ideal for perimeter fencing where the perimeter is not likely to be the subject of sustained abuse.
Axiom is manufactured to the highest standards and offers excellent value for money.
All Zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
Panels may be stepped in increments of 30mm as required within the clamp bar system. However, it is recommended that the taller panels are either partially buried or additional posts are used on steeper gradients.
Profile Mesh Gates
Pedestrian gates are single leaf 1.2m wide (or width to suit), framed in a 50mm x 50mm RHS with Zaun Axiom mesh clad on the outside of the frame, with slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit), framed in 50mm x 50mm RHS, with Zaun Axiom mesh clad outside the frame with drop bolts and slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
- Available in heights of 1730, 1930mm & 2330mm (other heights are available upon request)
- Open mesh pattern comprising of 50mm x 200mm mesh
- Horizontal wires are at 50mm centres with horizontal wires at 200mm centres
- Single 5mm wires
- It easily blends into surrounds
- V-shaped pressings to add rigidity
- Ideal for locations not suffering from sustained abuse
- Available either bolt down, in-ground or on wall
- High visibility
- Each panel is fixed to posts using Axiom clips at 400mm centres
To download our Axiom datasheet, please click on the link below;
To download our Q40 specification sheet, please click on the link below;
To download our standard colour list, please click on the link below;
To download our brochures, please click on the link below;
|Height||1730, 1930, 2330mm (other heights are available upon request)|
|Mesh Size||200mm x 50mm|
|Wire Diameter||5mm Verticals / 5mm Horizontals|
|Top Edge Projection||30mm Projection as Standard|
|Post Size||60 x 60|
|Fixings||Anti Tamper Security Fixings|