ArmaWeave® Plus CPNI Rated Fencing system has been designed for installation on sites of critical national importance (CNI). Developed specifically for sites that need the highest possible level of perimeter protection.
The CPNI approved enhanced fencing system offers a more substantial delay from attack from hand and power tools than other traditional welded mesh fencing systems. Thanks to its tighter mesh pattern and use of high tensile steel wires.
The mesh properties are maintained because of the careful design to eradicate risk from attack. ArmaWeave® Plus CPNI rated fencing system is our highest rated high-security fencing system, giving a maximum delay from forcible attack.
ArmaWeave® Plus high-security fencing also offers seamless integration with detection systems, including PIDs, CCTV and topping enhancements.
Tested and approved for UK government use by CPNI (contact CPNI for details) and various government departments. ArmaWeave® Plus meets the current criteria for a forcible attack. Also tested and approved by the MoD to use with most of the markets leading PID Systems.
The tight woven mesh pattern offers no climbing aids and provides little room for blades and cutting tools to attack the fabric.
The unique properties of the ArmaWeave® Plus CPNI rated fencing system has the ability to be raked. Thus, limiting the need for stepping panels on slopes and reducing installation costs significantly compared with standard welded mesh systems while still conforming to the highest-rated standards for fencing products defending against forcible attacks.
Unique Raking Abilities
ArmaWeave® CPNI approved fencing system, designed with specific tolerances enabling the system to rake and follow the site’s topography without compromising security or system rigidity. This makes ArmaWeave® the world’s only raking mesh system.
These unique raking abilities makes the system much easier to install on-site. Reducing civil work and additional civils for additional posts for stepping. Raking the panels on-site reduces the need for specially fabricated panels and pre-measuring of angles on site. Reducing cost for installation and material.
Posts & Fixings
The ArmaWeave® Plus perimeter security fencing system features a post and clamp bar configuration, providing a simple and easy installation method. Supplied with vandal-proof security fixings and installed using either power or hand tools.
Note: For CPNI, the maximum change of direction is 45°. A flange is welded at the post at 45°, or a post with two welded flanges at 22.5°.
Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available: Wall fixing or base plated posts, V Shape or Top Hat extensions for barbed or razor wire, extended posts for CCTV, electric fencing, lighting or physical security devices
ArmaWeave® High-Security Gates
Pedestrian gates are single leaf 1.2m wide (or width to suit). Framed in a 100mm x 50mm RHS with Zaun ArmaWeave® Plus woven mesh bolted to the frame, with slide latch. Each gate features a rubber bump stop and 2 x suitable gate posts.
Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit). Framed in 100mm x 50mm RHS, with ArmaWeave® Plus Mesh bolted to the frame, drop bolts and slide latch. Each vehicle Gate features a rubber bump stop and 2 x suitable gate posts.
- Approved for UK Government use (for details contact CPNI)
- Secured By Design approved
- Even more secure than standard ArmaWeave®
- Tight mesh offers no climbing aids
- Significant enhancement offered from attack by hand and powered tools
- High tensile steel
- Double high security fixing at post
- Aesthetically pleasing
- Mesh options available to meet criteria
- Works with detection systems
- Available either bolt down, in-ground or on wall
- European Patent No. 2509692
|Height||3000, 3300, 3900, 5200mm (Note: Additional heights available upon request)|
|Mesh Size||17 x 17mm|
|Wire Diameter||4mm Verticals x 4mm Horizontals|
|Top Edge Projection||Minimal Projections|
|Clamp Bar Size||140 x 5mm|
|Fixing Centres||Max. 330mm|
|Fixings||Bolts, Nuts & Washers|
|Panel Weight||12Kg per Sqm|