SR1 (A1) Security Rated Gates, manufactured by Zaun, specifically with security in mind. A1 rated gates, tested and approved to LPS 1175 Issue 8 by the Loss Prevention Certification Board (LPCB) and tested by the Buildings Research Establishment (BRE). This testing process has led to our products being entered into The RED BOOK.
Our SR1 (A1) Security Rated Vehicle Gates are the perfect accompaniment to our SR rated fencing solutions. Each gate is supplied with welded mesh infills Duo8 SR1 or HiSec SR1. Mesh panels are clad to the attack side of a steel 50mm x 50mm SHS frame. All vehicle gates are supplied as standard at 3.0m wide, although other widths and single leaf options are also available upon request.
SR1 rated gates, designed with an additional over clip and also special shear-drive bolts to the top and bottom of the mounting post of Zaun’s standard Duo8 gate to give the gates their SR1 rating. For the HiSec 358 gate, a clamp bar at the gate post’s side is included with bolts and stainless steel fixings.
All gates above 1.8m in height are supplied three safety points, either supplied with three hinges and/or supplied with gate arrestor cables. This means that if any of the hinge points fail, then the gate will not fail and cause harm to pedestrians and property. The gate is designed to in a way to prevent the leaf from being lifted away from the gate post, making it difficult to vandalise or damage. At Zaun, we believe that if a gate is big enough to present a real risk of crushing, then the failure of one component should not allow it to fall.
Vehicle swing gates are manufactured to comply with BS 1722 Part 14: 2017 and supplied with a slide latch locking mechanism and drop bolts. Vehicle swing gates may also be manufactured to suit automation.
Each gate can also be supplied with a range of topping options to provide additional security. Zaun can also provide an additional mesh over panel to encase the gate within the fence line.
All versions of our SR1 rated gates are also supplied with an SR-rated padlock as standard.
All Zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
What is LPS 1175 for SR1 Rated Gates?
LPS 1175 is the requirements and testing procedures for the LPCB approval. A listing of intruder resistant building components, strong points, security enclosures, and free-standing barriers, fencing, and gates. LPS 1175 covers the broadest scope of physical security products and services of any publicly available standard globally. LPS 1175 results from many years of work by LPCB, the UK Government, Insurers, and the Police. It has rapidly become a core element of physical security specification across many sectors.
The standard comprises several security ratings with test requirements of ascending intensity. Measured in terms of attack tools and also time available to the attacker. This enables specifiers to select products according to the risks that they and their property face. LPS 1175 is used in a range of applications, from residential right through to critical infrastructure projects.
- Security rated at SR1 LPCB LPS1175 by BRE as featured in the Red Book
- Supplied in either Duo8 or HiSec 358 mesh infills
- Available in heights of 1.8, 2.0, 2.4 and 3 metres
- Supplied in either single leaf or double leaf options
- Single leaf maximum width 1.6 metres
- Double leaf maximum width 7.1 metres
- In-ground or base plated post fixing options
- Available in your choice of RAL colours
- Supplied with SR rated locks
- Secured By Design approved
To download our SR1 Gates datasheet please click on the link below;
To download our Q40 specification sheet please click on the link below;
To download our test certificate please click on the link below
To download our standard colour list, please click on the link below;
To download our brochures, please click on the link below;
|Heights:||2.0m / 2.4m or 3m|
|Widths:||Single Leaf (1.6m Max) / Double Leaf (7.1m Max)|
|Infill:||Duo8 Twin Wire Mesh or HiSec 358|
|Lock:||Slide Latch with SR Rated Padlock|
|Finish:||Galvanised & Powder Coated to your choice of RAL Colour|