Zaun’s decorative fencing system, Gemini Surf, is one of the most attractive mesh fencing systems on the market. Each decorative fencing style shares the curvaceous styling associated with the Gemini range, one of four options available in the Gemini range (wave, convex, concave and surf). Each style, however, is different enough to allow radically different styles to be selected depending upon the setting.
Our decorative fencing systems have the ability to break up rigid fence lines. As a result, they are perfect for aesthetically sensitive areas or on show to the public or customers. The Gemini decorative fencing system is based on the twin-wire fencing systems Duo6 & Duo8, which use twin horizontal wires to sandwich the single vertical wires.
Each decorative fencing panel is supplied with anti-tamper security fixings and fixed to the posts using full-length clamp bars. The full-length clamp bar makes levering the panels away from the post very difficult and ensures no exposed panel edges on which people may snag themselves.
Due to its strength and great looks, Gemini fencing is ideal for housing projects, schools and prestigious projects where the fence needs a feature and a boundary.
Gemini is measured at post height, so the panels may exceed that height at the centre of the panel, depending on the style that has been chosen.
All Zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
For a full list of colours, click here
The Gemini decorative fencing system features a post, and clip configuration, providing a simple and easy installation method. Supplied with vandal-proof security fixings and installed using either power or hand tools.
Panels may be stepped in increments of 30mm as required within the clamp bar system. However, it is recommended that the taller panels are either partially buried or additional posts are used on steeper gradients.
Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available:
Pedestrian gates are single leaf 1.2m wide (or width to suit), framed in a 50mm x 50mm RHS with Zaun Duo8 mesh welded inside the frame, with slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit), framed in 50mm x 50mm RHS, with Zaun Duo8 mesh welded inside the frame, with drop bolts and slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
Note: these samples would be of the mesh only, not representing the contour topping.
|Height||1230, 1830, 2030, 2430mm (Other heights are available upon request)|
|Mesh Size||200mm x 50mm|
|Wire Diameter||5mm Verticals / 2 x 6mm Horizontals OR 6mm Verticals / 2 x 8mm Horizontals|
|Top Edge Projection||Minimal Projections|
|Post Size||60 x 40 / 80 x 40mm (depending on height)|
|Clamp Bar Size||40 x 5mm|
|Fixings||Anti Tamper Security Fixings|
Enter your details below to proceed.Send