Zaun’s Duo8 perimeter fencing system is a twin wire fencing panel featuring two 8mm horizontal wires that sandwich 6mm vertical wires.
Aimed at providing a strong rigid perimeter fencing solution that is not only aesthetically pleasing but provides a barrier to secure your site from potential trespassers, vandals and thieves.
Each panel is manufactured with a 50mm x 200mm mesh pattern, ideal for use with CCTV camera systems as the open mesh aperture provides excellent visibility on anyone trying to breach the perimeter. The welded mesh twin wire fencing system provides a rigid, robust and strong panel that is suitable for perimeter fencing solutions.
Supplied, as standard with clip fixings to fix the panels to the posts. A full length clamp bar is also available as an alternative, which provides additional security for any intruders trying to break into the fence line and may also be supplied with LPS1175 A1 (SR1) certification (see Duo8 SR1 for details).
The Duo 8 Perimeter fencing system is available up to 2.4 metres in height and with 2.5 metre wide standard bays (additional heights and widths also available upon request).
All Zaun posts/panels/gates and painted auxiliary components (for example clamp-bars, slide bolts etc) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc layer and the paint. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintenance of the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
For a full list of colours, click here
The Duo 8 double wire mesh fencing system features a post, and clip configuration, providing a simple and easy method of installation. Supplied with vandal-proof security fixings and installed using either power or hand tools.
Panels may be stepped in increments of 30mm as required within the clamp bar system. On steeper gradients it is recommended that the taller panels are either part buried or additional posts are used.
Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available:
Pedestrian gates are single leaf 1.2m wide, (or width to suit), framed in a 50mm x 50mm RHS with Zaun Duo8 mesh welded inside the frame, with slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit), framed in 50mm x 50mm RHS, with Zaun Duo8 mesh welded inside the frame, with drop bolts and slide latch. Gate supplied with rubber bump stop and 2 x suitable gate posts.
|Height||1230, 1830, 2030, 2430mm Note: Other heights are available upon request|
|Panel Width||2510mm / Optional 3010mm|
|Mesh Size||200mm x 50mm|
|Wire Diameter||6mm Verticals / 2 x 8mm Horizontals|
|Top Edge Projection||22mm Projection as Standard / Optional Flush|
|Post Size||60 x 60|
|Fixings||Anti Tamper Security Fixings|
Enter your details below to proceed.Send