Zaun’s range of twin wire vehicle gates is designed to allow the safe passage of vehicles or maintenance and plant equipment easily and simply through the fence line. Each gate can be manufactured with various twin wire mesh infills to match the fence line, including Duo6, Duo8, Duo Sports, Super Rebound, Tennis, Hockey, DualGuard, Gemini & Zariba.
Mesh panels are welded within a steel 50mm x 50mm SHS frame. All vehicle gates are supplied as standard at 3.0m wide, although other widths and single leaf options are also available upon request.
All gates above 1.8m in height are supplied three safety points, either supplied with three hinges and/or supplied with gate arrestor cables. This means that if any of the hinge points fail, then the gate will not fail and cause harm to pedestrians and property. The gate is designed to in a way to prevent the leaf from being lifted away from the gate post, making it difficult to vandalise or damage. At Zaun, we believe that if a gate is big enough to present a real risk of crushing, then the failure of one component should not allow it to fall.
Vehicle swing gates are manufactured to comply with BS 1722 Part 14: 2017 and supplied with a slide latch locking mechanism, but may also be designed with closers or your choice of lock, from a euro cylinder lock to electronic locks. Vehicle swing gates may also be manufactured to suit automation.
Each gate can also be supplied with a range of topping options to provide additional security. Zaun can also provide an additional mesh over panel to encase the gate within the fence line.
All of our vehicle swing gates are available with a wide variety of options, including a wide variety of security locks from suppliers, including PK Locks, Mico Tindall Locks, Locinox Locks, Signet Locks, Gatemaster and others.
All Zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
For a full list of colours, click here
Samples of Zaun mesh are available upon request. To request your free sample, please click here. Each pedestrian gate supplied with your choice of Zaun manufactured mesh, vertical bar or solid sheet to suit and match the fence line.
|Infill:||Advantage Tennis / DualGuard / Duo 6 / Duo 8 / Duo Sports / Gemini / Hockey / Super Rebound / Zariba Note: Custom mesh, and infills are also available upon request.|
|Heights:||400 mm / 600 mm / 800mm / 1000 mm / 1200 mm / 1400 mm / 1600mm / 1800 mm / 2000 mm / 2200mm / 2400 mm / 3000 mm / 3200mm / 3400mm / 3600mm / 3800 mm / 4000mm Note: Other heights are available upon request to suit the fence height|
|Infill Fixing Method||Mesh welded within the frame|
|Frame Size||50mm x 50mm|
|Width:||Single Leaf 3.0m to 7.0m / Double Leaf 3.0m to 14.0m|
|Gate Posts:||Supplied with 2 x Suitable Gate Posts|
|Hinges:||Qty 2 / Qty 3 (depending on the size of the gate leaf)|
|Gate Arrestors:||Supplied with ALL gates 1.8m high and above|
|Lock:||Slide latch as standard (other locking mechanisms available upon request)|
|Accessories:||Supplied with drop bolts and rubber bump stop as standard. Additional hinges, closers and access control also available upon request.|
Enter your details below to proceed.Send