MultiFence PAS 68 HVM fence and barrier system are one of the first fully-integrated hostile vehicle mitigation fence solutions on the market. MultiFence PAS 68 is a patented design that achieves PAS 68 2010:V/7500(N2)/64/90:5.0/0.0 and PAS 68 2010:V/7500(N2)/48/90:3.0/0.0. This means that MultiFence PAS can stop a 7.5t truck at both 30mph and 40mph.
This HVM Fencing System is designed to mitigate the ever-increasing security risk on sites of critical importance. With a zero penetration solution, this system uses leading industry technologies to nullify an attack by vehicles.
MultiFence PAS 68 combined all the attributes of our standard system and tested it to meet the stringent quality standards of BS EN 1317 Part 2 (vehicle restraint systems). Featuring TVCB blocks, which are approved for use by the Highways Agency. Ideal for applications such as temporary and major events, transport hubs, utilities and others, as no below-ground foundations are required. This PAS 68 fence system may also be used on the soft and hard standing ground.
MultiFence PAS 68 is supplied with TVCB blocks designed to deflect an errant vehicle away from local hazards within or immediately adjacent to the highway, which can potentially cause danger to the occupants of an errant vehicle, the workforce, or others.
MultiFence PAS 68 can also be used with a range of fence toppings and integrated solutions to provide a full turnkey high-security solution. Pedestrian and vehicle gates are also available to match the fence line.
BSI PAS 68 is the Publicly Available Specification for vehicle security fencing, gates, blockers, bollards and barriers. It has become the standard and benchmark for all Hostile Vehicle Mitigation (HVM) products. It is in this specification that all physical perimeter security equipment is tested to prevent vehicle-borne attacks.
|BSI PAS68:2010 V/7500/N2/48/90/3.0/0.0 &
PAS 68 2010:V/7500(N2)/64/90:5.0/0.0
|Vehicle Test Weight||Vehicle Class||Vehicle Speed (KPH)||Vehicle Angle||Vehicle Penetration (m)||25KG+ Dispersion (m)|
This Publicly Available Specification (PAS) addresses the requirements of companies and organisations who want to guarantee that the perimeter vehicle barriers will provide the level of impact resistance they are aiming for.
PAS68 identifies impact test methods, tolerances, test vehicle type and vehicle performance criteria that need to be met to conform to PAS68. (more…)
A wide range of Hostile Vehicle Mitigation (HVM) gates is available to complement this PAS 68 fencing system. Our range of HVM gates designed and manufactured with matching mesh. Also available galvanised and/or powder coated to a colour of your choice.
Zaun MultiFence panels are typically manufactured from pre-galvanised GalZal® steel wire according to BS EN 10244-2 class A Zn95AL5 standards with a typical thickness in wire diameter of 275g/m2 (on a 4mm wire). Fences coated in GalZal® do not require additional powder coating as protection.
A powder-coated option and enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
For a full list of colours, click here
The MultiFence PAS 68 fence features a post and clamp bar configuration, providing a simple and easy installation method. Supplied with vandal-proof security fixings and installed using either power or hand tools.
Posts are available in different lengths to accommodate panel heights. Additional variations are also available:
Samples of Zaun mesh are available upon request. To request your free sample, please click here.
|Height Range:||2000mm - 2700mm|
|Mesh Size:||12.7mm x 76.2mm (358 style mesh) as standard. Other mesh options such as ArmaWeave are also available upon request.|
|Wire Diameter:||4mm Verticals & 4mm Horizontals as standard|
|Top Edge Projection:||100mm minimal spikes|
|Post Sizes:||60 x 60mm|
|Clamp Bar Size:||40mm x 5mm|
|Fixings:||Anti Tamper Security Fixings|
|VCB Size:||800 x 450 x 3000mm|
|VCB Type:||TVCB with HVM Cable System|
Enter your details below to proceed.Send