



Zaun‘s BowTop Play Playground Fencing is an attractive system that is often used around play areas. Zaun’s BowTop Play Playground Fencing is manufactured to RoSPA guidelines and BS 1722 part 9 compliant, to make it as safe as possible.
The nature of the BowTop playground fencing system means that parents have an unhindered view of their children in the play area, and the system itself means that children can play safely. All of the bars and ‘bows’ are spaced so as to minimise the chance of wrist or neck trap occurring.
The vertical bars are very difficult for children to climb and so help ensure they stay in the play area.
Available in standard panels from stock or bespoke panels can be manufactured to non-standard length and raked and radiused to suit individual requirements.
Available in two heights 1.0m and 1.2m. Each railing is supplied with panels, posts, stepping cleats and security fixings. Supplied hot dip galvanised to BS EN ISO 1461 and optional Polyester Powder Coated.
Matching Bow Top gate or slow closing safety gate also available.
Hot dip galvanised to ISO1461 & optional polyester powder coated, after stringent cleaning & treatment to give a well adhered coating with a minimum of 60 microns.
All Zaun posts/panels/gates and painted auxiliary components (for example clamp-bars, slide bolts etc) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc layer and the paint. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintenance of the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.
Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.
For a full list of standard colours, click here
The Bowtop Play railing system features a post and stepping cleat configuration, providing a simple and easy method of installation. Supplied with vandal-proof security fixings and installed using either power or hand tools.
Panels can be stepped as required on the post. Where gradients exceed 1:16, it is recommended that the stepping cleats are adjusted to suit the gradient as required. Panels can also be sloped to the following gradients, within the tolerance of the post section:
0 to 16mm / 56mm / 56 to 72mm
Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available:
Pedestrian gates are single leaf 1.2m wide, (or width to suit), framed in a 50mm x 50mm RHS with Bowtop Play style panels within the gate frame, with slide latch and slow closer. Gate supplied with 2 x suitable gate posts.
Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit), framed in 50mm x 50mm RHS, with Bowtop Play style panels within the gate frame, with drop bolts and slide latch. Gate supplied with 2 x suitable gate posts.
Note: Slow closing RoSPA compliant playground gates also available
Fence Height | 1000mm / 1200mm Note: Additional heights are available upon request |
Panel Width | 2700mm |
Bar Diameter | 12mm / 16mm Note: Dependant on height |
Bar Centres | 101mm |
Post Size | 50mm x 50mm |
Post Centres | 2760mm |
Fixings | Anti Tamper Security Fixings |
Enter your details below to proceed.
Send