Super 6 358 HiSec | Perimeter Security Fencing | Zaun Ltd

02. HiSec Super 6 CPNI Approved Fencing

HiSec Super 6 358 mesh was developed in consultation with the Home Office. Aimed at high profile and sensitive sites that require greater perimeter protection. HiSec Super 6 358 is based on the standard HiSec 358 mesh system. Still, it is even stronger, presenting a stronger barrier to anyone trying to gain unauthorised access to key assets and sites than standard 358.

The 4mm horizontal wires remain the same as the standard HiSec 358 mesh; however, the vertical wires are at 6mm diameter rather than the standard 4mm. The mesh pattern remains 76.2mm x 12.7mm, providing excellent visibility for use with CCTV cameras and other detection technology.

Supplied with tamper-proof fixings and full-length clamp bars to provide additional security for any intruders trying to break into the fence line. Typically supplied with panels overlapping at the post, but also available in a double-slotted clamp bar version if required.

HiSec Super 6 358 can also be used with a range of fence toppings and integrated solutions to provide a full turnkey high-security solution. Pedestrian and vehicle gates are also available to match the fence line.


Finish

All Zaun posts/panels/gates and painted auxiliary components (for example, clamp-bars, slide bolts etc.) benefit from a protective zinc layer and electrostatically applied polyester powder coating to BS1722 p16. Care is taken with pre-treatment to ensure sound adhesion between the zinc and paint layers. In a UK C1 environment, as defined in ISO 12944 p2, this should ensure a useful life expectancy of the fence of at least 15-20 years. Life expectancy in all environments can be extended by maintaining the fencing with regular washing. Useful life will be reduced if the fencing is damaged. Any coating damage should be repaired to reduce the effect on useful life.

Enhanced painting systems such as marine coatings are also available for improved life expectancy in C2-C5M environments.

For a full list of colours, click here

Also available in GalZal®.


Posts & Fixings

The HiSec Super 6 perimeter security fencing system features a post and clamp bar configuration, providing a simple and easy installation method. Supplied through bolts, nuts and washers and installed using either power or hand tools.

Note: For CPNI, the maximum change of direction is 45°. A flange is welded at the post at 45°, or a post with two welded flanges at 22.5°.


Sloping Ground

Panels can be stepped as required on the post. However, it is recommended that taller panels are either part-buried or additional posts are used on steeper gradients. Panels can also be sloped to follow lesser gradients.


Variations

Posts are available in different lengths to accommodate panel heights and ground conditions. Additional variations are also available:


HiSec Super 6 358 Fence Gates

Pedestrian gates are single leaf 1.2m wide (or width to suit). Framed in a 100mm x 50mm RHS with Zaun HiSec Super 6 mesh bolted to the frame, with slide latch. Each gate features a rubber bump stop and 2 x suitable gate posts.

Vehicle access gates are double leaf (single leaf vehicle gates available) 3.0m wide (or width to suit). Framed in 100mm x 50mm RHS, Zaun HiSec Super 6 bolted to the frame, with drop bolts and slide latch. Each vehicle Gate features a rubber bump stop and 2 x suitable gate posts.


Samples Available

Samples of Zaun HiSec Super 6 are available upon request. To request your free sample, please click here.


Who is CPNI?

CPNI (Centre for Protection of National Infrastructure) is the government authority for protective security advice to the UK national infrastructure. Their role is to protect national security by helping to reduce the vulnerability of the national infrastructure to terrorism and other threats.

CPNI heavily promote the theory of deterring and detect so that protective security is put in place or built into the design, security measures or protocols to reduce the consequences of an attack.

CPNI advice on physical security, personnel security and cybersecurity/information assurance also explain how these components combine and reinforce each other to protect assets. More…

Applications

Features and Benefits
  • The 358 tight mesh configuration offers no climbing aids
  • Conforms to BS1722: Part 14
  • Each mesh panel wires are welded at every intersection
  • Mitigates attack by hand and powered tools through tight mesh design
  • Single panel heights can be supplied of up to 5.20 metres
  • Available either bolt down, in ground or on wall post options
  • 2 different vandal and tamper-proof fixing options available (single fix or dual fix)
  • High visibility makes the 358 weld mesh ideal for use with CCTV cameras
  • Secured By Design and CPNI approved
  • For areas where visibility needs to be restricted, upgrades can be added
  • Difficult to cut with bolt croppers
  • Extremely strong and robust
  • Capable of being stepped to allow for installation on uneven ground
  • A wide variety of fence toppings can also be supplied (see Fence Toppings)
  • Matching pedestrian and vehicle gates are also available
Download To download our HiSec Super 6 358 datasheets, please click on the link below; To download our change of direction detail, please click on the link below; To download our Q40 specification sheet, please click on the link below; To download our standard colour list, please click on the link below; To download our brochures, please click on the link below;
Specifications
Height 1270, 1829, 2007, 2438, 2997, 4204, 5207mm (Note: Additional heights available upon request)
Panel Width 2515mm
Mesh Size 76.2 x 12.7mm
Wire Diameter 6mm Verticals x 4mm Horizontals
Top Edge Projection Minimal (Optional Extra)
Post Size 80 x 80
Clamp Bar Size 80 x 5mm
Post Centres 2440mm
Fixing Centres 400mm Max.
Fixings Through Bolts, Washers & Nuts
  Note: Zaun manufactures 358 from cut to length line wires; the panels are not cropped.  They are supplied as standard with short protruding wires on top and bottom. If flush panels are required, this should be requested at the time of enquiry.
Drawing

Enter your details below to proceed.

 

Send
Certifications and Approvals
5775
4990
288
70